ZitatAlles anzeigenenigma2: 4.3.1r13
- use colon as hour delimiter instead of a single point in multiepg
- multiepg fixes
- removed unneeded and not working combo pls scrambling support in single transponder service scan screen
- dont seek twice to position 0 on start of ts playback
- updated translations
- added support for some new jultec jess switches
Neues Dreambox Update verfügbar !
-
- Info
- Angel
-
-
Zitat
dm52x: update dreambox hardware drivers
- fixed a demux0 problem -
Zitat
enigma2: 4.3.1r14
- fixed possible crashes on enigma2 startup
- fixed some tuner config related issues
- fixed subtitle force-mode switching after selecting a new subtitle track (thanks to go4dream for the hints)
- AudioSelection: added TTX page to subtitle selection
- small fixes for UPnP/DLNA MediaRendererZitatenigma2: 4.3.1r15
- satellite tuner optimizations
- allow configuration of multiple tuners as slave of a motorized dish (option "addition cable of motorized LNB")
- fixed support for unicable LNBs on motorized dishes
- allow satpos dependent tuners for unicable (same as the "slave of motorized dish option")
- some internal optimizations for tuner score calculation
- rework and improve service error and connection handling -
enigma2: 4.3.1r16
- fixed handling of tuners with multiple inputs and multiple channels (e.g. FBC tuner)
- allow multiple unicable sources on tuners with multiple inputs
- added help dialog to ConfigSet (used for FBC Unicable SCR configuration)
- added Kathrein EXD1532/2532 with all variants to unicable switch list
- added skin for SatelliteEquipmentControl (thx to hk2k2)
- fixed another cause for a startup-crash/race condition when spinners are not ready, yet
- fixed crash on timeshift start when subtitles are currently active
- added dedicated skin for Mediarenderer LCD screen (MediaRendererLCDScreen, as requested by some skinners)
- fixed some issues with the new InfoBarStateInfo (stale and outdated information shown until zapping ) -
Update 04/10/2017
Zitat4.3.1r17
- show the ConfigSet help dialog in tuner configuration
- use smaller font for ConfigSet help dialog (needed for LNBs/switches with much SCRs)
- moved Kathrein EXD unicable entries from LNB to Switch section
- fixed some more issues for tuners with multiple inputs and multiple channels (e.g. BCM45208 FBC tuner)git.opendreambox.org Git - enigma2.git/commit
Zitatupdate dm820 hardware drivers (fixed opengl)
-
Zitat
4.3.1r18
- some changes for dm920 support
- more tuner score calculation fixes for multi channel / multi input tuners (e.g. BCM45208)
- tuner score calculation fix for motorized dishes
- add support to display used tuner inputs and currently active tuner input in skins and use it for the default skin infobar
- fixed osd screenshots showing backbuffer content -
Update 12/10/2017
Zitat
4.3.1r18
- some changes for dm920 support
- more tuner score calculation fixes for multi channel / multi input tuners (e.g. BCM45208)
- tuner score calculation fix for motorized dishes
- add support to display used tuner inputs and currently active tuner input in skins and use it for the default skin infobar
- fixed osd screenshots showing backbuffer content
git.opendreambox.org Git - enigma2.git/commitUpdate 22/10/2017
Zitat
bcmdriver: update dm920 tarball
meta-games: bump srcrev
python-backports-lzma: import from meta-virtualization
Updated upstream Git repositories
tpmd: update for dm920
meta-games: update for dm920, compile fix
enigma2: enable Si2169D multistream support, allow auto modulation for BCM45308X
meta-games: update srcrev
update dm52X hardware drivers -
Update 27/10/2017
Zitat
4.3.1r19
- fixed display screenshots (broken since 4.3.1r18)
- enable Si2169D multistream support
- whitelisted BCM45308X for auto modulation support
- fixed tuner conflict detection for satpos dependend tuners
- fixed a possible servicelist crash
- fixed a multi input multi channel tuner bug (e.g. FBC tuner)
(adding timers has affected real tuners and caused tune errors)
- fixed possible errors if two recordings start exactly at the same time on different transponders -
Zitat
update dm900 hardware drivers
- fixed issue that made sure that after playing a recording or after booting the CI has not decrypted in conjunction with a FBC tuner -
Zitat
4.3.1r20
- fixed wrong tuner score calculation when a motor is in use and
transponder is changed from a satellite in the east- to the
westhemisphere or vice versa
- allow cable blindscan for Si2169D based tuners .. its not needed to select a cable provider in tuner configuration
- use auto delivery system for terrestrial scan with Si2169D based tuners
- take care of multistream capability when calculate frontend allocation score
git.opendreambox.org Git - enigma2.git/commitenigma2: add hotfix to prevent crashes on enigma2 start with empty tuner slot(s)
-
Zitat
updated dm900 and dm920 hardware drivers (fixed picture errors during playback)
-
Update 14/11/2017
Zitat
enigma2: add small patches
- remove mediacenter from extensions menu... it is in mainmenu
- update default favourites -
Update 15/11/2017
Zitat
update dm820/dm7080 hardware drivers- correctly report multistream support for silabs based DVB-S2 tuners (is evaluated since enigma2 4.3.1r20!) -
Update 19/11/2017
Zitatupdate dm920 hardware drivers... small demux bugfix
git.opendreambox.org Git - opendreambox.git/commit
Zitatenigma2: max allowed Symbolrate for blindscan is 45000KSyms, do not allow to select unicable user defined for fbc tuners because it is currently not possible to configure more than one SCR in way
git.opendreambox.org Git - opendreambox.git/commit
Zitatenigma2: add patch to fix not working DVB-S transponders directly after blindscan (broken since 4.3.1r20)
-
Zitat
4.3.1r21
- Fixed crash when there are empty tuner slots
- Fixed some satellite blindscan issues
- Updated default TV Favorites
- Fixed occasional crash on enigma2 shutdown
- Updated translations
- Added Default-FHD skin
- Updated HbbTV to 1.5 (some of the APIs only have stub-implementations) and fix several issues (for example Pro7/Sat1 does work properly now)
- Added experimental HTML5 Video support to the browser
- Added central "Maximum stream resolution" setting to System/Customize (used by latest tubelib)
- Removed MediaCenter from extensions menu (it's on the main menu)
- For Developers
- Allow use of eFileWatch from python
- Added setSuburi(uri) to eServiceReference, allowing to set an explicit "subtitle" uris. uri can also contain audio. -
Zitat
enigma2: 4.3.1r22
- fixed invisible lists in wizards
- fixed some menu icon paths
- fixed crash when CI is used -
Zitat
update dm900/dm920 hardware drivers
- bcm45208/bcm45308x: don't report DVB-S2 QPSK transponders as auto modulation
- bcm45308x: small 16apsk/32apsk support fix
- bcm45208/bcm45308x: tuning to DVB-S2 transponders aft -
Zitat
enigma2: 4.3.1r23
- fixed crash in channel searching dialog for tuners configured to "satpos depends"
- for now ignore advanced tuner score for fbc tuners
- fixed crash when more than 4 satellites are configured with multiple fbc tuners
- PiconResolver bugfix for DVB-T(2) workaround (thanks to spinmar)
- GraphMultiEPG: added some usability improvements (thanks to LazyT)
- skin updates for plugins
- developers stuff:
- allow to close lcd/oled device when lock is called.. so the lcd/oled can be used from outside of e2
- export eDVBDB::searchReference to python .. (helpful for DVB-T(2) epg import)git.opendreambox.org Git - opendreambox.git/commit
Zitat
update dm900/dm920 hardware drivers- fixed progressive/interlaced detection when deinterlacer mode is forced to off or on- fixed wrong returned framerates for interlaced content- fixed demux problem on channel change between two physical fbc tuners (dm920) -
Zitat
enigma2: add support for DCT Delta MSU 401/2-16K unicable2 switches, small PiconResolver fix for DVB-T/T2
-
Zitat
enigma2-plugins: push srcrev for krogoth-stable update